During the NASA Perseverance rover’s exploration of the Jezero crater floor, purple-hued coatings were commonly observed on rocks. These features likely record past water-rock-atmosphere interactions on the crater floor, and understanding their origin is important for constraining timing of water activity and habitability at Jezero. Here we characterize the morphologic, chemical, and spectral properties of the crater floor rock coatings using color images, visible/near-infrared reflectance spectra, and chemical data from the Mastcam-Z and SuperCam instruments. We show that coatings are common and compositionally similar across the crater floor, and consistent with a mixture of dust, fine regolith, sulfates, and ferric oxides indurated as a result of one or more episodes of widespread surface alteration. All coatings exhibit a similar smooth homogenous surface with variable thickness, color, and spatial extent on rocks, likely reflecting variable oxidation and erosional expressions related to formation and/or exposure age. Coatings unconformably overlie eroded natural rock surfaces, suggesting relatively late deposition that may represent one of the last aqueous episodes on the Jezero crater floor. While more common at Jezero, these coatings may be consistent with rock coatings previously observed in-situ at other landing sites and may be related to duricrust formation, suggesting a global alteration process on Mars that is not unique to Jezero. The Perseverance rover likely sampled these rock coatings on the crater floor and results from this study could provide important context for future investigations by the Mars Sample Return mission aimed at constraining the geologic and aqueous history of Jezero crater.

The first samples collected by the Perseverance rover on the Mars 2020 mission were from the Maaz formation, a lava plain that covers most of the floor of Jezero crater. Laboratory analysis of these samples back on Earth will provide important constraints on the petrologic history, aqueous processes, and timing of key events in Jezero. However, interpreting these samples will require a detailed understanding of the emplacement and modification history of the Maaz formation. Here we synthesize rover and orbital remote sensing data to link outcrop-scale interpretations to the broader history of the crater, including Mastcam-Z mosaics and multispectral images, SuperCam chemistry and reflectance point spectra, RIMFAX ground penetrating radar, and orbital hyperspectral reflectance and high-resolution images. We show that the Maaz formation is composed of a series of distinct members corresponding to basaltic to basaltic andesite lava flows. The members exhibit variable spectral signatures dominated by high-Ca pyroxene, Fe-bearing feldspar, and hematite, which can be tied directly to igneous grains and altered matrix in abrasion patches. Spectral variations correlate with morphological variations, from recessive layers that produce a regolith lag in lower Maaz, to weathered polygonally fractured paleosurfaces and crater-retaining massive blocky hummocks in upper Maaz. The Maaz members were likely separated by one or more extended periods of time, and were subjected to variable erosion, burial, exhumation, weathering, and tectonic modification. The two unique samples from the Maaz formation are representative of this diversity, and together will provide an important geochronological framework for the history of Jezero crater.

During the first 2934 sols of the Curiosity rover’s mission 33,468 passive visible/near-infrared reflectance spectra were taken of the surface by the mast-mounted ChemCam instrument on a range of target types. ChemCam spectra of bedrock targets from the Murray and Carolyn Shoemaker formations on Mt. Sharp were investigated using principal component analysis (PCA) and various spectral parameters including the band depth at 535 nm and the slope between 840 nm and 750 nm. Four endmember spectra were identified. Passive spectra were compared to Laser Induced Breakdown Spectroscopy (LIBS) data to search for correlations between spectral properties and elemental abundances. The correlation coefficient between FeOT reported by LIBS and BD535 from passive spectra was used to search for regions where iron may have been added to the bedrock through oxidation of ferrous-bearing fluids, but no correlations were found. Rocks in the Blunts Point-Sutton Island transition that have unique spectral properties compared to surrounding rocks, that is flat near-infrared (NIR) slopes and weak 535 nm absorptions, are associated with higher Mn and Mg in the LIBS spectra of bedrock. Additionally, calcium-sulfate cements, previously identified by Ca and S enrichments in the LIBS spectra of bedrock, were also shown to be associated with spectral trends seen in Blunts Point. A shift towards steeper near-infrared slope is seen in the Hutton interval, indicative of changing depositional conditions or increased diagenesis.

The SuperCam instrument onboard Perseverance rover has remote imaging (RMI), VISIR, LIBS, Raman and Time-Resolved Luminescence (TRL) capabilities. RMI images of the rocks at the Octavia Butler landing site have revealed important granular texture diversities. VISIR raster point observations have revealed important differences in the 2.10-2.50 µm infrared range (metal-hydroxides); many include water features at 1.40±0.04 and 1.92±0.02 µm [1]. LIBS observations on the same points analyzed by VISIR revealed important differences in the concentrations of major elements, suggesting mineral grain sizes larger than the laser beam (300-500 µm). LIBS and VISIR show coherent results in some rock surfaces that are consistent with an oxy-hydroxide (e.g., ferrihydrite) [1]. LIBS elemental compositions are consistent with pyroxenes, feldspars, and more often feldspar-like glass, often enriched in silica. Olivine compositions [1, 2] have been observed so far in LIBS data (up to Sol 140) exclusively in rounded regolith pebbles. They have not yet been observed in the rocks themselves, which are MgO-poor compared to regolith and are consistent with FeO bearing pyroxenes (e.g., hedenbergite, ferrosilite). A 3x3 LIBS and VISIR raster (9x9 mm) acquired on a low-standing rock on sol 90 exemplifies these finding. A dark L-shaped filled void sampled by points 1 and 2 with possible ferrihydrite (H seen in LIBS and VISIR spectra). Point 5 contains abundant silica and alkali elements but is Al-depleted relative to feldspars, consistent with dacitic glass composition. Point 7 has TiO2 content consistent with ilmenite. Comparisons to (igneous) Martian meteorites are potentially useful, e.g. [3], to explain the presence of several minerals, although most Martian meteorites are olivine-rich, e.g., more mafic than the rocks at the landing site. In summary, the bedrock at Octavia Butler landing site can be interpreted as showing evidence for relatively coarse-grained weathered pyroxenes, iron and titanium oxides and feldspars, while the local soil contains pebbles from a different source (richer in MgO) incorporating olivine grains. References: [1] Mandon et al. 2021 Fall AGU, New Orleans, LA, 13-17 Dec. ; [2] Beyssac et al. 2021 Fall AGU, New Orleans, LA, 13-17 Dec. ; [3] Garcia-Florentino et al.(2021), Talanta, 224, 121863.

Images from the Mars Science Laboratory (MSL) mission of lacustrine sedimentary rocks of Vera Rubin ridge on “Mt. Sharp” in Gale crater, Mars, have shown stark color variations from red to purple to gray. These color differences cross-cut stratigraphy and are likely due to diagenetic alteration of the sediments after deposition. However, the chemistry and timing of these fluid interactions is unclear. Determining how diagenetic processes may have modified chemical and mineralogical signatures of ancient martian environments is critical for understanding the past habitability of Mars and achieving the goals of the MSL mission. Here we use visible/near-infrared spectra from Mastcam and ChemCam to determine the mineralogical origins of color variations in the ridge. Color variations are consistent with changes in spectral properties related to the crystallinity, grain size, and texture of hematite. Coarse-grained gray hematite spectrally dominates in the gray patches and is present in the purple areas, while nanophase and fine-grained red crystalline hematite are present and spectrally dominate in the red and purple areas. We hypothesize that these differences were caused by grain size coarsening of hematite by diagenetic fluids, as observed in terrestrial analogs. In this model, early primary reddening by oxidizing fluids near the surface was followed during or after burial by bleaching to form the gray patches, possibly with limited secondary reddening after exhumation. Diagenetic alteration may have diminished the preservation of biosignatures and changed the composition of the sediments, making it more difficult to interpret how conditions evolved in the paleolake over time.

The Mars Environmental Dynamics Analyzer (MEDA) on board Perseverance includes first-of-their-kind sensors measuring the incident and reflected solar flux, the downwelling atmospheric IR flux, and the upwelling IR flux emitted by the surface. We use these measurements for the first 350 sols of the Mars 2020 mission (Ls ~ 6-174 deg; in Martian Year 36) to determine the surface radiative budget on Mars, and to calculate the broadband albedo (0.3-3 μm) as a function of the illumination and viewing geometry. Together with MEDA measurements of ground temperature, we calculate the thermal inertia for homogeneous terrains without the need for numerical models. We found that: (1) the observed downwelling atmospheric IR flux is significantly lower than model predictions. This is likely caused by the strong diurnal variation in aerosol opacity measured by MEDA, which is not accounted for by numerical models. (2) The albedo presents a marked non-Lambertian behavior, with lowest values near noon and highest values corresponding to low phase angles (i.e., Sun behind the observer). (3) Thermal inertia values ranged between 180 (sand dune) and 605 (bedrock-dominated material) SI units. (4) Averages across Perseverance’ traverse of albedo and thermal inertia (spatial resolution of ~3-4 m2) are in very good agreement with collocated retrievals of thermal inertia from THEMIS (spatial resolution of 100 m per pixel) and of bolometric albedo in the 0.25-2.9 μm range from (spatial resolution of ~300 km2). The results presented here are important to validate model predictions and provide ground-truth to orbital measurements.

The Mars Science Laboratory (MSL) Curiosity rover has explored over 400 meters of vertical stratigraphy within Gale crater to date. These fluvio-deltaic, lacustrine, and aeolian strata have been well-documented by Curiosity’s in-situ and remote science instruments, including the Mast Camera (Mastcam) pair of multispectral imagers. Mastcam visible to near-infrared (VNIR) spectra can broadly distinguish between iron phases and oxidation states, and in combination with chemical data from other instruments, Mastcam spectra can help constrain mineralogy, depositional origin, and diagenesis. However, no traverse-scale analysis of Mastcam multispectral data has yet been performed. We compiled a database of Mastcam spectra from >600 multispectral observations and 1 quantified spectral variations across Curiosity’s traverse through Vera Rubin ridge (sols 0-2302). From principal component analysis and an examination of spectral parameters, we identified 9 rock spectral classes and 5 soil spectral classes. Rock classes are dominated by spectral differences attributed to hematite and other oxides (due to variations in grain size, composition, and abundance) and are mostly confined to specific stratigraphic members. Soil classes fall along a mixing line between soil spectra dominated by fine-grained Fe-oxides and those dominated by olivine-bearing sands. By comparing trends in soil vs. rock spectra, we find that locally derived sediments are not significantly contributing to the spectra of soils. Rather, varying contributions of dark, mafic sands from the active Bagnold Dune field is the primary spectral characteristic of soils. These spectral classes and their trends with stratigraphy provide a basis for comparison in Curiosity’s ongoing exploration of Gale crater.

The Mastcam-Z radiometric calibration targets mounted on the NASA’s Perseverance rover proved to be effective in the calibration of Mastcam-Z images to reflectance (I/F) over the first 350 sols on Mars. Mastcam-Z imaged the calibration targets regularly to perform reflectance calibration on multispectral image sets of targets on the Martian surface. For each calibration target image, mean radiance values were extracted for 41 distinct regions of the targets, including patches of color and grayscale materials. Eight strong permanent magnets, placed under the primary target, attracted magnetic dust and repelled it from central surfaces, allowing the extraction of radiance values from eight regions relatively clean from dust. These radiances were combined with reflectances obtained from laboratory measurements, a one-term linear fit model was applied, and the slopes of the fits were retrieved as estimates of the solar irradiance and used to convert Mastcam-Z images from radiance to reflectance. Derived irradiance time series are smoothly varying in line with expectations based on the changing Mars-Sun distance, being only perturbed by a few significant dust events. The deposition of dust on the calibration targets was largely concentrated on the magnets, ensuring a minimal influence of dust on the calibration process. The fraction of sunlight directly hitting the calibration targets was negatively correlated with the atmospheric optical depth, as expected. Further investigation will aim at explaining the origin of a small offset observed in the fit model employed for calibration, and the causes of a yellowing effect affecting one of the calibration targets materials.

The Perseverance rover, Mars 2020 mission, landed on the surface of the Jezero Crater, on February, 18th 2021. This Martian crater is suspected to have hosted a paleolake as evidenced by the numerous detections of aqueously-altered phases and thus is a promising candidate for the search for past Martian life. The SuperCam instrument, elaborated by a consortium of American and European laboratories, plays a leading role in this investigation thanks to its highly versatile payload providing rapid, synergistic, fine-scale mineralogy, chemistry, and color imaging. After its landing, the first measurements of Martian targets with the infrared spectrometer of SuperCam (IRS) showed new instrumental behaviors that had to be characterized and calibrated to derive unbiased science data. The IRS radiometric response has thus been calibrated using periodic observations of the Aluwhite SuperCam Calibration Target (SCCT). Parasitic effects were understood and mitigated, and the instrumental dark and noise are characterized and modeled. The reflectance calibrated data products, provided periodically on the NASA Planetary Data System, are corrected from the main instrumental features.

Since 2001, the Mars Exploration Program Analysis Group (MEPAG) has maintained a document outlining community consensus priorities for scientific goals, objectives, and investigations for the robotic and human exploration of Mars [1]. This “Goals Document” is a living document that is revised regularly (~every few years) in light of new Mars science results. It is organized into a hierarchy of goals, objectives, and investigations. The four Goals are not prioritized and are organized around major areas of scientific knowledge: “Life”, “Climate”, “Geology”, and “Preparation for Human Exploration”. Don Banfield is the current MEPAG Goals Committee Chair, and he oversees 2-3 representatives per Goal [2]. The most recent round of revisions (2018) was prompted by discussion at the 6th International Mars Polar Science and Exploration Conference (held in 2016 in Reykjavik, Iceland [3]), which pointed out that current high-priority Polar Science and Present-Day Activity questions were not well represented in content or priorities within the 2015 Goals Document. Upon request from the MEPAG Executive and Goals Committees [2], specific areas of disconnect were highlighted by representatives of the Mars Polar Science community; these were evaluated by the Goals Committee who proposed changes at sub-objective and investigation levels within the Climate and Geology Goals. These proposed changes were open for comment by the larger Mars community for 6 weeks, and then finalized. The official MEPAG 2018 Goals Document will be presented at the meeting. Additionally, the presentation will describe plans for the next round of revisions, which are expected to primarily come out of the presentations and discussion at the 9th International Conference on Mars (to be held at Caltech, Pasadena, CA in July 2019 [4]), and which are expected to include reference to returned sample science. The 2019 MEPAG Goals Document will form an important input to the next Planetary Science Decadal Survey [5]. [1] https://mepag.jpl.nasa.gov/reports.cfm?expand=science [2] https://mepag.jpl.nasa.gov/about.cfm [3] https://www.hou.usra.edu/meetings/marspolar2016/ [4] https://www.hou.usra.edu/meetings/ninthmars2019/ [5] NASEM, 2017. CAPS: Getting Ready for the Next Planetary Science Decadal Survey. https://doi.org/10.17226/24843.