The paper presents a novel technique to detect the solvents in water like sugar, salt, and its combination using a wideband CPW fed microstrip antenna with periodic EBG ground structure. The antenna is designed and fabricated to operates at the bandwidth of 3 GHz with a stable gain of 9 dBi maintaining VSWR<2. The uniquely designed antenna works as a sensor in its near field to sense the solvents in water in terms of resonant frequency and reflection method in wider bandwidth. The technique also detects the changes in the temperature of the soft drinks as a function of reflection characteristics. This technique will be useful for finding the percentage of solvents in soft drinks before consumption. The sensing technique is without physical contact with the solution and chemical process. Therefore it is a healthy way to find the ingredients in solutions like soft drinks. The technique will be useful to the food regulation boards to limit the contents of beverages and cold drinks.

We present a numerical method for simulating 2D flow through a channel with deformable walls. The fluid is assumed to be incompressible and viscous. We consider the highly viscous regime, where fluid dynamics are described by the Stokes equations, and the less viscous regime described by the Navier-Stokes equations. The model is formulated as an immersed boundary problem, with the channel defined by compliant walls that are immersed in a larger computational fluid domain. The channel traverses through the computational domain, and the walls do not form a closed region. When the walls deviate from their equilibrium position, they exert singular forces on the underlying fluid. We compute the numerical solution to the model equations using the immersed interface method, which preserves sharp jumps in the solution and its derivatives. The immersed interface method typically requires a closed immersed interface, a condition that is not met by the present configuration. Thus, a contribution of the present work is the extension of the immersed interface method to immersed boundary problems with open interfaces. Numerical results indicate that this new method converges with second-order accuracy in both space and time, and can sharply capture discontinuities in the fluid solution.

Autonomous dishwasher loading is a benchmark problem in robotics that highlights the challenges of robotic perception, planning and manipulation in an unstructured environment. Current approaches resort to a specialized solution, however, these technologies are not viable in a domestic setting. Learning-based solutions seem promising for a general purpose solutions, however, they require large amounts of catered data, to be applied in real-world scenarios. This paper presents a novel solution based on pre-trained object detection networks. By developing a perception, planning and manipulation framework around an off-the-shelf object detection network, we are able to develop robust pick-and-place solutions that are easy to develop and general purpose requiring only a RGB feedback and a pinch gripper. Analysis of a real-world canteen tray data is first performed and used for developing our in-lab experimental setup. Our results obtained from real-world scenarios indicate that such approaches are highly desirable for plug-and-play domestic applications with limited calibration. All the associated data and code of this work is shared in a public repository.

The hot deformation characteristics of Nickel-based corrosion resistant alloy was studied in the temperature range of 1050~1200oC and the strain rate range of 0.001~0.1s-1 by employing hot compression tests. The results show that the peak stress increases with decreasing temperature and increasing strain rate, and the activation energy is about 409kJ/mol. Basing on the Avrami equation through using the critical strain (εc) and the strain for 50% DRX (ε0.5), a kinetic model for dynamic recrystallization (DRX) was established, where the model parameters could be obtained using the modified Zener-Hollomon parameter (Z*). Applying the model, the predicted value of the steady state strain (εss) and the strain for maximum softening rate (εm) agree well with the experimental results. Accordingly, the relationship between ε m and ε 0.5 is established, which is mainly dependent on the Avrami exponent (n). When n <3.25, εm becomes less than ε0.5 and the difference in between decreases with increasing the strain rate or decreasing the deformation temperature. Finally, through observing DRX microstructure under different deformation conditions, a power law relation between DRX grain size (Ddrx) and Z*, with an exponent of -0.36, was found.

Optical cables are enormous transmission media which carries high-speed data across transatlantic, intercontinental, international boundaries and cities. The optical cable is essential in data communication. The cable has become an indispensable component in optical communications infrastructure; hence, conscious efforts are always adopted to prevent or minimize faults in the optical network infrastructure. Typically, tracing fault in the underground optical network has been difficult even though optical time-domain reflectometer (OTDR) has been used to measure the distance of faults in the underground fiber cable. The methodologies deployed in the reviewed literature indicate a vast gap between the fault distance measured by the OTDR and the actual distance of fault. This paper observed the difficulties involved in tracing the actual spot of fault in the underground optical networks. The difficulty of tracing these underground faults mostly result in an undue delay and loss of revenue. This research presents a machine learning (ML) approach to predict the actual location of a fiber cable fault in an underground optical transmission link. Linear regression in the python sci-kit learn library was used to predict the actual location of a fault in an underground optical network. The MSE and MAE evaluation matrix used provided good accuracy results of 0.061291 and 0.080143, respectively. The result obtained in this paper indicates that faults in underground optical networks can be found quickly to avoid the delays in the fault tracing process, which leads to an excessive revenue loss.

Tunnels had been undergone accidental and intentional blast in the past. An analysis of a rock tunnel when subjected to internal blast loading has been presented in this paper. A three-dimensional finite element model of a huge rock mass comprising the tunnel has been developed in Abaqus/CAE. Diameter of the tunnel has been kept constant to a two-lane transportation tunnel. However, liner thickness of the concrete, overburden pressure on the tunnel has been varied to observe the response in different possible conditions. To incorporate the elastoplastic response of rock mass, Mohr-Coulomb constitutive material model has been considered. For modelling of trinitrotoluene (TNT), Jones-Wilkins-Lee material model has been adopted. Concrete Damage Plasticity material model has been adopted for tunnel lining. For the blast loading, Coupled-Eulerian-Lagrangian (CEL) model has been considered. Results highlight the importance of tunnel lining thickness and overburden depth while designing the tunnel in rocks. Under any amount of explosive, deep tunnels have been found to be safer than shallow tunnel.

This research reports on an image processing technique used to merge Magnetic Resonance Imaging (MRI) or Magnetic Resonance Angiography (MRA) with their intensity-curvature functional (ICF). Given a two-dimensional MR image, six 2D model polynomial functions were fitted to the image, and six ICF images were calculated. The MR image and its ICF were direct Fourier transformed. The phase of MR image was estimated pixel-by-pixel as arctangent of ratio between imaginary and real components of k-space and is called phase ratio. The phase of ICF is the phase of inverse Fourier transformation and is called base phase. The two values of phase were summed up and used to reconstruct ICF images through inverse Fourier transformation. The reconstructed image is the combination of MR and ICF. Data obtained with T2-MRI and MRA indicates that the technique improves vessel detection in T2-MRI and contrast enhances T2-MRI and MRA.

A new beam switch antenna based on a composite right/left-handed (CRLH) Butler matrix is presented and experimentally validated. The CRLH transmission line (TL) is proposed to increase the number of beams. The proposed CRLH TL has more than 100◦ phase differences using variable bias voltages. Different combinations of phase shifts are achieved by applying different bias voltages between 0 and 8V. The CRLH TL is added to the conventional Butler matrix to increase the progressive phase difference between adjacent ports, and consequently, the beam pattern. A 5◦ beam resolution within a spatial range of 100◦ is achieved. The measurement results are in good agreement with the simulations.

The demand for electricity is increasing all over the world. In Bangladesh, there are many rural areas where the grid connection has not reached yet. In this paper, a performance evaluation was done with a solar-wind hybrid renewable energy system with diesel backup for a school located in a remote area, Baje Fulchari village in Gaibandha district, Bangladesh. For the proposed site, the load demand was considered 10.468 kWh/day for a normal working day (taken from a field survey) having peak demand of 3.3 kW. HOMER software was used for the simulation. The solar radiation and wind speed data were collected from NASA Surface meteorology and Solar Energy database. The NPC for the most economical system configuration is found USD 6,191 with a COE of 0.125 $/ kWh. Compared to the conventional power plants the proposed system can reduce the COE and GHG emission of about 29.85% and 69% respectively. The system evaluated in this work might be implemented in a school or any other location of similar load profile anywhere in the world having the same geographical and meteorological conditions.

A review of investigations on the effect of drag-reducing agents in curved pipe flows is presented in this work. Proposed mechanisms of drag reduction, as well as factors that influence their effectiveness also received attention. In addition, this review outlined proposed friction factor and fluid flux models for flow of drag-reducing agents in curved pipes. It was shown in this report that significant drag reduction in curved pipes can be achieved using drag-reducing agents. Drag reduction by additives in curved pipes are generally lower than the corresponding drag reduction in straight pipes. It decreases with increase in curvature ratio and is more pronounced in the transition and turbulent flow regimes. Drag reduction depends strongly on the concentration of polymers and surfactants as well as the bubble fraction of micro-bubbles. It is also reported that drag reduction in curved pipes depends on other factors such as temperature and presence of dissolved salts. Maximum drag reduction asymptote differed between straight and curved pipes and between polymer and surfactant. Due to the limited studies in the area of drag reduction for gas-liquid flow in curved pipes no definite conclusion could be drawn on the effect of drag-reducing agents on such flows. A number of questions remain such as the mechanism of drag reduction in curved pipes and how drag-reducing agents interact with secondary flows. Hence, some research gaps have been identified with recommendations for areas of future researches.

The main goal of this study is to determine the aerodynamic performance and to characterize unsteady flows in a high-speed high-reaction pre-whirl axial flow fan. The pressure waves’ main diametrical modes where two blades interact with two vanes and their sequences are predicted. There are mainly two mechanisms of IGV-rotor interactions identified; the first is attributed to the potential effect whereas the second is due to the wake-blade interaction and the advection of wake mixing into the blades’ passages. Both effects are dependent on the circumferential positions of blades and the axial inter-distance between IGV and rotor. The time mode analyses of pressure fluctuations recorded from different monitor points are determined and the frequencies of prevailing modes and those related to the vortical flow structure through the components are also identified. The understanding of vanes and blade rows interactions at various axial inter-distances is an important step in determining the beneficial and detrimental effects on the design of high performance axial fan stage.

In this paper, a novel beam steerable 2.4 GHz MIMO antenna array is proposed based on the Yagi-Uda principle. The antenna consists of two co-axially excited patch radiators with modified ground plane. A conducting strip with an integrated PIN diode is optimally placed between the patch radiators to act as a director or a reflector to steer the main beam by an angle of +/- 60◦. For all switching modes, the MIMO antenna demonstrates an average gain and efficiency of 5 dB and 92%, respectively, at the resonance frequency of 2.4 GHz. Reduced envelope correlation coefficient in one switching mode exhibited 17 dB improvement in mutual isolation. The simulated results agreed well with measured data. This simple, low-cost, efficient, and mutually isolated antenna array can be very useful in MIMO WLAN applications.

This paper presents a complete design procedure, with an optimized feeding method, of two-dimensional slotted waveguide antenna arrays (2D SWAs). For a desired sidelobe level ratio, the proposed system provides a pencil shape pattern with a narrow halfpower beamwidth, large sidelobe level ratio (SLR), and very low sidelobe levels (SLL), which makes it suitable for high power microwave applications. The radiating slotted waveguide antennas use longitudinal slots, designed for a specified slidelobe level ratio and resonance frequency. The resulting two-dimensional slotted waveguide antenna array is formed by stacking a number of similarly designed radiating SWAs, and fed with an additional SWA. The proposed feeding method uses longitudinal coupling slots rather than the conventional inclined coupling slots, which can provide better values of SLR and easily obtain very low SLLs, in comparison with the conventional systems. The feeder dimensions and slots positions are deduced from the dimensions and total number of the radiating SWAs. For a desired SLR, the slots excitation in the radiating and feeder SWAs are calculated based on a specified distribution. Then, using simplified closed-form equations and for a desired resonance frequency, the slots lengths, widths, and their distribution along the length of the radiating SWAs and feeder SWA can be found. Two examples are illustrated with different number of slots and radiating elements, and one is fabricated and tested. Chebyshev distribution is used to estimate the excitations of the SWA slots in the examples. The obtained measured and simulated results are in accordance with the design objectives.

A study is considered to a steady, two-dimensional boundary layer flow of an incompressible MHD fluid for the Blasius and Sakiadis flows about a flat plate in the presence of thermo-diffusion (Dufour) and thermal-diffusion (Soret) effects for variable parameters. The governing partial differential equations are transformed into a system of nonlinear ordinary differential equations using similarity variables. The transformed systems are solved numerically by Runge-Kutta Gills method with shooting techniques. The variations of the flow velocity, temperature and concentration as well as the characteristics of heat and mass transfer are presented graphically with tabulated results. The numerical computations show that thermal boundary layer thickness is found to be increased with increasing values of Eckert number (Ec), Prandtl number (Pr) and local Grashof number (Gr_x) for both Blasius and Sakiadis flow. The Blasius flow elevates the thickness of the thermal boundary layer compared with the Sakiadis flow. The local magnetic field has shown that flow is retarded in the boundary layer but enhances temperature and concentration distributions.

Reduction in the torsional vibration of heavy rotors like turbo-generator rotor is important for the safe and efficient functioning of the power plant. In this paper theoretical study is performed to control the torsional vibration in the turbo-generator rotor using piezoelectric material as sensor and actuator. Polyvinylidene fluoride (PVDF) layer is used as sensor and actuator. Proportional and velocity feedback is used as control law. The variation in the electromagnetic torque of synchronous generator during various electrical faults is evaluated using dq0 model. Finite element method is used to model the rotor elements. The coupled equations are solved in MATLAB using Newmark-beta integration method. The coupling elements of turbine and generator are most susceptible to the shear failure so torsional vibration of coupled rotor on coupling elements are compare for controlled and uncontrolled scenario. Simulation results show that for actively controlled rotor significant reduction in the amplitude of torsional vibrations is observed.

Simulated microgravity (s-µg) devices provide unique conditions for elucidating the effects of gravitational unloading on biological processes. However, s-µg devices are being increasingly applied for mechanobiology studies without proper characterization of the mechanical environment generated by these systems, which confounds results and limits their interpretation. Furthermore, the cell culture methodology central to s-µg approaches introduces new conditions that can fundamentally affect results, but these are currently not addressed. It is essential to understand the complete culture environment and how constituent conditions can individually and synergistically affect cellular responses in order to interpret results correctly, otherwise outcomes may be misattributed to the effects of microgravity alone. For the benefit of the growing space biology community, this article critically reviews a typical s-µg cell culture environment in terms of three key conditions: fluid-mediated mechanical stimuli, oxygen tension and biochemical (cell signalling). Their implications for biological analysis are categorically discussed. A new set of controls is proposed to properly evaluate the respective effects of s-µg culture conditions, along with a reporting matrix and potential strategies for addressing the current limitations of simulated microgravity devices as a platform for mechanobiology.

In the biopharmaceutical industry, Raman spectroscopy is now a proven PAT tool that enables in-line simultaneous monitoring of several CPPs and CQAs in real-time. However, as Raman monitoring requires multivariate modeling, variabilities unknown by models can impact the monitoring prediction accuracy. With the widespread use of Raman PAT tools, it is necessary to fix instrumental variability impacts, encountered for instance during a device replacement. In this work, we investigated the impact of instrumental variability between probes inside a multi-channel analyzer and between two analyzers, and explored solutions to correct them on model prediction errors in cell cultures. We found that the Kennard Stone Piecewise Direct Standardization (KS PDS) method enables to lower model prediction errors and that only one batch with the unknown device in the calibration dataset was sufficient to correct the prediction gap induced by instrumental variability. As a matter of fact, during device replacement a first cell culture monitoring can be performed with the KS PDS method. Then, the new data obtained can be inserted in the calibration dataset to integrate instrumental variability in the chemometric model. This methodology provides good multivariate calibration model prediction errors throughout the instrumental changes.

Under proper loading conditions, micro-to-nanoscale heterogeneities (i.e., the bond system) that are commonly found within the materials of a system can coalesce until causing macroscopic alterations of the system properties. The bond system is responsible for atypical and invariant-scale non-linear elastic processes in granular media, from laboratory-tested materials (mm) to the Earth’s crust (km). The unusual observed behavior involves slow recovery, or relaxation, of the elastic properties after dynamic loading. Several models have been designed to explain non-linear elasticity, although their physics is still partially unknown. Here, we show that recovery processes are also observed at intermediary scales (m) in civil engineering structures, and that they might be related to structural health due to the healing of cracks. For Japanese buildings subjected to earthquakes, we observe rapid co-seismic reductions of their resonance frequency, followed by fascinating recoveries over different time-scales: over short times (i.e. seconds) for a single earthquake; over intermediate times (i.e. months) for a sequence of aftershocks; and over long times (i.e. years) for a series of earthquakes. By comparing two buildings with different damage levels after the 2011 Tohoku earthquake, we show how relaxation models can characterize the level of cracking caused by damaging events. Our results bridge the gap between the laboratory and seismological observation scales, verifying in this way the universality of recovery processes, and demonstrating their value for the detection and characterization of damage.