loading page

Crystal-plastic deformation in seismically active carbonate fault rocks
  • +3
  • Markus Ohl,
  • Billy Nzogang,
  • Alexandre Mussi,
  • David Wallis,
  • M.R. Drury,
  • Oliver Plümper
Markus Ohl
Utrecht University, Utrecht University

Corresponding Author:[email protected]

Author Profile
Billy Nzogang
Université de Lille, Université de Lille
Author Profile
Alexandre Mussi
Universite de Lille, Universite de Lille
Author Profile
David Wallis
University of Cambridge, University of Cambridge
Author Profile
M.R. Drury
Utrecht University, Utrecht University
Author Profile
Oliver Plümper
Utrecht University, Utrecht University
Author Profile

Abstract

The spatial separation of macroscopic rheological behaviours has led to independent conceptual treatments of frictional failure, often referred to as brittle, and viscous deformation. Detailed microstructural investigations of naturally deformed carbonate rocks indicate that both, frictional failure, and viscous mechanisms might operate during seismic deformation of carbonates. Here, we investigate the deformation mechanisms that were active in two carbonate fault zones in Greece by performing detailed slip-system analyses on data from automated crystal-orientation mapping transmission electron microscopy and electron backscatter diffraction. We combine the slip system analyses with interpretations of nanostructures and predictions from deformation mechanism maps for calcite. The nanometric grains at the principal slip surface should deform by diffusion creep but the activation of the (0001)<-12-10> slip system is evidence for a contribution of crystal plasticity. A similar crystallographic preferred orientation appears in the cataclastic parts of the fault rocks despite exhibiting a larger grain size and a different fractal dimension, compared to the principal slip surface. The cataclastic region exhibits microstructures consistent with activation of the (0001)<-12-10> and {10-14}<-2021> slip systems. Post-deformational, static recrystallisation and annealing produces an equilibrium microstructure with triple junctions and equant grain size. We propose that repeated introduction of plastic strain and recrystallisation reduces the grain size and offers a mechanism to form a cohesive nanogranular material. This formation mechanism leads to a grain-boundary strengthening effect resulting in slip delocalisation which is observed over six orders of magnitude (μm–m) and is expressed by multiple faults planes, suggesting cyclic repetition of deformation and annealing.