loading page

Locating rockfalls using inter-station ratios of seismic energy at Dolomieu crater, Piton de la Fournaise volcano
  • +8
  • Julian Kuehnert,
  • Anne Mangeney,
  • Yann Capdeville,
  • Jean-Pierre Vilotte,
  • Eleonore Stutzmann,
  • Emmanuel Chaljub,
  • El-Madani Aissaoui,
  • Patrice BOISSIER,
  • Christophe Brunet,
  • Philippe KOWALSKI,
  • Frédéric Lauret
Julian Kuehnert
Institut de Physique du Globe de Paris, Institut de Physique du Globe de Paris, Institut de Physique du Globe de Paris

Corresponding Author:[email protected]

Author Profile
Anne Mangeney
Institut de Physique du Globe de Paris, Institut de Physique du Globe de Paris, Institut de Physique du Globe de Paris
Author Profile
Yann Capdeville
Université de Nantes, Université de Nantes, Université de Nantes
Author Profile
Jean-Pierre Vilotte
Institut de Physique du Globe de Paris, Institut de Physique du Globe de Paris, Institut de Physique du Globe de Paris
Author Profile
Eleonore Stutzmann
Institut De Physique Du Globe De Paris, Institut De Physique Du Globe De Paris, Institut De Physique Du Globe De Paris
Author Profile
Emmanuel Chaljub
Université Grenoble Alpes, Université Grenoble Alpes, Université Grenoble Alpes
Author Profile
El-Madani Aissaoui
Institut de Physique du Globe de Paris, Institut de Physique du Globe de Paris, Institut de Physique du Globe de Paris
Author Profile
Patrice BOISSIER
IPGP, IPGP, IPGP
Author Profile
Christophe Brunet
IPGP, IPGP, IPGP
Author Profile
Philippe KOWALSKI
IPGP, IPGP, IPGP
Author Profile
Frédéric Lauret
IPGP / UMR 7154, IPGP / UMR 7154, IPGP / UMR 7154
Author Profile

Abstract

Rockfalls generate seismic signals that can be used to detect and monitor rockfall activity. Event locations can be estimated on the basis of arrival times, amplitudes or polarization of these seismic signals. However, surface topography variations can significantly influence seismic wave propagation and hence compromise results. Here, we specifically use the signature of topography on the seismic signal to better constrain the source location. Seismic impulse responses are predicted using Spectral Element based simulation of 3D wave propagation in realistic geological media. Subsequently, rockfalls are located by minimizing the misfit between simulated and observed inter-station energy ratios. The method is tested on rockfalls at Dolomieu crater, Piton de la Fournaise volcano, Reunion Island. Both single boulder impacts and distributed granular flows are successfully located, tracking the complete rockfall trajectories by analyzing the signals in sliding time windows. Results from the highest frequency band (here 13-17\,Hz) yield the best spatial resolution, making it possible to distinguish detachment positions less than 100\,m apart. By taking into account surface topography, both vertical and horizontal signal components can be used. Limitations and the noise robustness of the location method are assessed using synthetic signals. Precise representation of the topography controls the location resolution, which is not significantly affected by the assumed impact direction. Tests on the network geometry reveal best resolution when the seismometers triangulate the source. We conclude that this method can improve the monitoring of rockfall activity in real time once a simulated database for the region of interest is created.